Aksesuarlar


Ethernet Patch Cable

Ethernet Patch Cable
  • Appropriate for D14D and Q24M camera models
  • Cable with special sealing
  • 2 x RJ45 plug

Yazı numaraları:
MX-OPT-CBL-LAN-1 (1m)
MX-OPT-CBL-LAN-2 (2m)
MX-OPT-CBL-LAN-5 (5m)
MX-OPT-CBL-LAN-10 (10m)


Connector Cable CamIO

Connector Cable CamIO - M12
  • Connector cable to M12 camera models (with 4x5 cubic plug > HD-15)
  • Connector cable to M22 camera models (with 4x5 cubic plug > USB)

Yazı numaraları:
MX-CAMIO-OPT-M12 (Verbindung CamIO - M12)
MX-CAMIO-OPT-M22 (Verbindung CamIO - M22)


Connector Cable ExtIO (5m)

  • Appropriate for Q24 camera models (with miniUSB > miniUSB plug)
  • Appropriate for D22/D24 camera models (with miniUSB > miniUSB plug)
  • Appropriate for M22 camera models (with miniUSB > USB plug)
  • Appropriate for M12 / D12 camera models (with miniUSB > HD15 plug)
  • All cable lengths approx. 5 m

Yazı numaraları:
MX-CBL-Q24-MU-MU-5 (Connection ExtIO - Q24)
MX-CBL-MU-MU-5 (Connection ExtIO - D22 / D24)
MX-CBL-HD-MU-5 (Connection ExtIO - M12 / D12)


Connector Cable ExtIO (1m)

connector cable MU-MU
  • Connector cable with miniUSB > miniUSB plug
  • Appropriate for D22/D24 and Q22 camera models
  • Appropriate for Q24 camera models

Cable lengths approx. 1 m

Article numbers:
MX-CBL-MU-MU-1 (Connection ExtIO - D22 / D24 / Q22)
MX-CBL-Q24-MU-MU-1 (Connection ExtIO - Q24)


MxLink - DevKit Extension Set

MxLink

DevKit Extension Set – 1 meter cable extension between sensor and DevKit board

  • Tx module instead of ribbon cable for coupling to the sensor
  • Rx module for coupling to the DevKit main board
  • MxLink connection cable (1 m)
  • Only available for DevKit
  • Screw connection directly on the DevKit board and sensor
    (sensor to be ordered separately)

Article number:
MX-Link-1


Ribbon Cable for DevKit

ribbon cable
  • 30cm ribbon cable for connecting MX camera modules
    Note: Ribbon cables 30cm are included in the camera modules.

Article number:
MX-M12-DevKit-L30


Dome for D12, D22 and D24

Replacement Dome

Article numbers:
MX-D12D-OPT-DCT (transparent, for D14, D12)
MX-D12D-OPT-DCS (tinted (50%), for D14, D12)
MX-D22M-OPT-DCT (clear, for D22)
MX-D22M-OPT-DCS (tinted (50 %), for D22)
MX-D24M-OPT-DCT (clear, for D24)
MX-D24M-OPT-DCS (tinted (50 %), for D24)


Lens Cover with Glass Pane

Lens cover for M22M

for M24 and M22

  • Lens protection for extreme weather conditions
  • Scratch-proof glass
  • For all lenses

Article numbers:
MX-M24M-OPT-LCSG (short version for M24)
MX-M24M-OPT-LCSGL (extented version for CSVario lenses for M24)
MX-M22M-OPT-LCSG (short version for M22)
MX-M22M-OPT-LCSGL (extented version for CSVario lenses for M22)


Lens Protection

Lens cover for M22M

for M24 and M22

  • Lens protection, material: plastic
  • Suitable for all lenses

Article numbers:
MX-M24M-OPT-LCSK
MX-M22M-OPT-LCSK


Vandalism Housing for Q24 Sec

Q22 Vandalism Housing

for Q24 Sec and Q22 Sec

  • Vandalism-proof housing including lens protection with reinforced dome (3mm polycarbonate)
  • Stainless steel, finish matt or polished
  • Including security screws
  • Ideally suited for surveillance at extremely critical locations

Article numbers:
MX-Q24M-Vandal-ESMA (matt, for Q24)
MX-Q24M-Vandal-ESPO (polished, for Q24)
MX-Q22M-Vandal-ESMA (matt, for Q22)
MX-Q22M-Vandal-ESPO (polished, for Q22)


Vandalism Kit for D12

Vandalism_Kit, matt

 

  • Stainless steel cover
  • Reinforced dome (3mm polycarbonate)

Yazı numaraları:
MX-D12D-Vandal-ESMA (matt)

 

 


Vandalism Kit for D14

Vandalism_Kit, matt
  • Stainless steel cover
  • Reinforced dome (3mm polycarbonate)

Yazı numaraları:
MX-D14D-Vandal-ESMA (matt)
MX-D14D-Vandal-ESPO (polished)
MX-D14D-Vandal-PUGR (gray powder-coated)
MX-D14D-Vandal-PUWH (white powder-coated)
MX-D14D-Vandal-PUBL (black powder-coated)

 


Vandalism Set for D22/D24

Vandalism Set, polished
  • Stainless steel cover
  • available in
  • polished, matt, gray, black, white

Yazı numaraları:
MX-D24M-Vandal-ESMA (matt)
MX-D24M-Vandal-ESPO (polished)
MX-D24M-Vandal-PUGR (gray powder-coated)
MX-D24M-Vandal-PUBL (black powder-coated)
MX-D24M-Vandal-PUWH (white powder-coated)


Lenses

MX Lens

 

Lenses from Super Wide Angle (90°) to Tele (15°) for all MOBOTIX cameras.

Detailed information about our lenses can be found on the site lens options.

Yazı numaraları:

MX-OPT14-L22 (L22 Super Wide Angle)

MX-OPT14-L32 (L32 Wide Angle)

MX-OPT14-L43 (L43 Wide Angle)

MX-OPT14-L65 (L65 Tele )

MX-OPT14-L135 (L135 Tele )


CSVario Lens

CSVario Lens

Vario Lens, in connection with CS lens mount

  • Vario lens for sensors with CS thread
  • f = 4.5 up to 10mm (? approx. 24 to 54mm on 35mm systems)

Yazı numarası:

MX-OPTCS-L24-54


Sensor board (M14)

MX Sensorboard M14

Sensor board with M14 lens mount for DevKit models

  • Color sensor: 2048x1536 pixels Sensitivity: 1-0.05 lux
  • B/W sensor: 1280x960 pixels Sensitivity: 0.1-0.005 lux
  • Aluminium block
  • Ribbon cable (approx. 30cm)

Yazı numaraları:

MX-M12-DevKit-C (Color sensor)

MX-M12-DevKit-BW (B/W sensor)


Sensor in aluminium block (M14)

MX Sensor Alu M14

Sensor with M14 lens mount for DevKit models

  • Color sensor: 2048x1536 pixels Sensitivity: 1-0.05 lux
  • B/W sensor: 1280x960 pixels Sensitivity: 0.1-0.005 lux
  • Aluminium block
  • Ribbon cable (approx. 30cm)

Yazı numaraları:

MX-M12-DevKit-M14-C (Color sensor)

MX-M12-DevKit-M14-BW (B/W sensor)


Sensor in aluminium block (CS)

MX Sensor Alu CS

Sensor with CS lens mount for DevKit models

  • Color sensor: 2048x1536 pixels Sensitivity: 1-0.05 lux
  • B/W sensor: 1280x960 pixels Sensitivity: 0.1-0.005 lux
  • Aluminium block
  • Ribbon cable (approx. 30cm)

Yazı numaraları:

MX-M12-DevKit-CS-C (Color sensor)

MX-M12-DevKit-CS-BW (B/W sensor)


Special sensor in aluminium block (M14)

MX Sensor Alu M14

DevKit sensor with special long-pass filter (LPF) and M14 lens mount in aluminium block

  • B/W sensor: 1280x960 pixels Sensitivity: 0.1-0.005 lux
  • Aluminium block
  • Ribbon cable (approx. 30cm)
  • Special filter (LPF) integrated provides optimal contrast for numberplate recognition

Yazı numarası:

MX-M12-DevKit-M14-LPF


In-Ceiling Set for D22/D24 IT/Sec, Q22/Q24 Sec and ExtIO

 


D22 and Q22 In-Ceiling Set
  • Consists of in-ceiling mount and mounting parts
  • Easy mounting from front
  • Installation dimension: ∅ 150 mm

Article number:

MX-OPT-IC


On-Wall Set for D22/D24 IT/Sec, Q22/Q24 Sec and ExtIO

 


D22_Q22_On-Wall Set
  • Consists of on-wall mount and mounting parts
  • Protects the cabling
  • Allows integrating additional modules

Article number:

MX-OPT-AP


10° On-Wall Set for D22/D24 IT/Sec, Q22/Q24 Sec and ExtIO

 


  • Consists of on-wall mount and mounting parts
  • Also conforms to U.S. installation standards Protects the cabling
  • Allows integrating additional modules

Article number:

MX-OPT-AP-10DEG


Outdoor Wall Mount for D22/D24 IT/Sec, Q22/Q24 Sec and ExtIO

 


Wall Mount D22 and Q22
  • Weatherproof (IP65) wall mount for MOBOTIX dome cameras D22/D24 IT/Sec, Q22/Q24 Sec and ExtIO
  • Covers RJ45 wall outlets
  • Space for expansion modules (battery, UMTS, WLAN, etc.)

Article number:

MX-OPT-WH



Pole Mount For Use With Wall Mount MX-OPT-WH

 


D22_Q22_Pole Mount
  • Fastening for Dome wall mount MX-OPT-WH (for D22/D24 IT/Sec, Q22/Q24 Sec and ExtIO)
  • 3 mm stainless steel, white
  • Delivery includes mounting parts and 2 stainless steel straps for pole diameters of 60 - 180 mm

Article number:

MX-OPT-MH



Set Pole Mount and Wall Mount for D22/D24 IT/Sec and Q22/Q24 Sec

 


D22_Q22_Set Pole Mount and Wall Mount

Set consisting of pole mount (MX-OPT-MH) and wall mount (MX-OPT-WH)

  • Pole Mount for fastening of Dome wall mount
  • 3 mm stainless steel, white powder-coated
  • Delivery with mounting parts and 2 stainless steel straps for pole diameters of 60 - 180 mm
  • Wall mount is weather-proof (IP65) for protection of D22/D24 MonoDome
  • Covers RJ45 wall outlets
  • Space for expansion modules (battery, UMTS, WLAN, etc.)

Article number:

MX-OPT-WHMH


Wall Mount for D12 and D10

 


MX-WH-Dome
  • Used with wall mount D14 DualDome is weather-proof (IP65)
  • Covers RJ45 wall outlets
  • Space for expansion modules (WLAN)

Article number:

MX-WH-Dome



Pole and Corner Mount D12 and D10

 


D12_Pole/Corner Mount
  • Fastening for dome wall mount
  • 3mm stainless steel, white
  • Includes screws and stainless steel straps for pole diameters 60-180mm

Article number:

MX-MH-Dome-ESWS



Set Pole/Corner Mount and Wall Mount for D12

 


Set consisting of pole/corner mount (MX-MH-Dome-ESWS) and wall mount (MX-WH-Dome)

  • Pole/corner Mount: 3 mm stainless steel, white
  • Delivery with mounting parts and 2 stainless steel straps for pole diameters of 60-180mm
  • Used with wall mount D14 DualDome is weather-proof (IP65)
  • Covers RJ45 wall outlets
  • Space for expansion modules (WLAN)

Article number:

MX-D14D-OPT-WHMH-Set

M12 SecureFlex wall/ceiling mount
  • Turn/tilt unit with concealed cabling
  • Covers RJ45 wall outlets > patented tamper-proof concealed cabling

Article number:

MX-WH-SecureFlex

MX-MH-SecureFlex

for M24, M22, M12 and M10

  • 3mm stainless steel,white
  • Mast or pole mounting
  • Pole circumference from 60 to 180mm
  • 2 x metal mounting bands, fittings and grommet included

Article number:

MX-MH-SecureFlex-ESWS


30V universal power supply with RJ45 plug

30V external power supply
  • For the cameras M12, D12, M22, D22, Q22, M10, M1 and D10 (not suitable for Q24)
  • For the connection of the camera via network power adapter
  • Input voltage: 100-250 V~
  • Output voltage: 30 V=/240 mA

Article numbers:

MX-SNT-E01-30-RJ (version for Europe)

MX-SNT-GB01-30-RJ (version for UK)

MX-SNT-U01-30-RJ (version for USA)

MX-SNT-J01-30-RJ (version for Japan)

MX-SNT-AUS01-30-RJ (version for Australia)


Power Adapter PoE Set

 


Netzwork Power Adapter Set
  • PoE injector incl. crossover function for direct connection to the PC
  • For all MOBOTIX cameras (except for M1 und M10), Mx2wire and all PoE devices
  • For connection to the power network, to voltage sources 12 - 42 V, to all PoE classes with input voltage starting from 16 V!

Article numbers:

MX-NPA-PoE-SET-EU (with power plug for Europe)

MX-NPA-PoE-SET-INT (with power plugs for EUR, UK, US, AUS)


Network Power Box 4 cameras

Network Power Box
  • DIN rail NETPOWER Network Power Box for 4 cameras (30V)
  • Only for the cameras M12, D12, M22, D22, Q22, M10, M1 and D10

Article number:

MX-NPR-4


19" NETPOWER Network Power Rack

Network Power Rack 8

 

  • Network power rack for inline power supply
  • For up to 8 or 20 cameras respectively
  • With RJ45 sockets
  • Only for the cameras M12, D12, M22, D22, Q22, M10, M1 and D10

Article numbers:

MX-NPR-8 (for 8 cameras)

MX-NPR-20 (for 20 cameras)


CamIO Extension Module

CamIO Module
  • Easy installation and a service friendly structure
  • Interface for the connections of ext. sensors, devices (door contact, light, etc.)
  • 2 x relays (230V/500W)
  • 2 x input, backup, audio

Article numbers:

MX-CAMIO-POE (PoE)


ExtIO Extension Module

  • Extension for MOBOTIX cameras
  • Microphone/speaker
  • PIR sensor for motion detection, temperature sensor
  • Integrated switch functions

Article number:

MX-ExtIO


IO Module

 


MX IO Module

The board provides an additional 8 inputs and 3 outputs to connect external devices (doorbell, light, Siedle "Vario" modules etc.)

Article number:

MX-OPT-IO1


IO Module Ethernet Connection

 


MX IO2 Module Ethernet connection

Ethernet terminal board

Securely connects the camera module with the mounted 8 wires of the network patch cable via RJ45 connector.

(Only for T24 version without Mx2wire)

Article number:

MX-OPT-IO2


Grandstream IP Videophone GXV3140

 


  • Easy-to-use indoor remote station for T24 door station, tested by MOBOTIX
  • Excellent image display on integrated, large LCD color monitor
  • Generously equipped with numerous multimedia features
  • Integrated on-screen user menu and preset keys for operating the T24 door station
  • Full-duplex speaker phone provides for simultaneous bidirectional communication
  • Integrated echo cancellation

Article number:

Grandstream GXV3140


Outdoor PatchBox

 


PatchBox

Weatherproof Universal network connector for installation cables, MOBOTIX patch cables and standard patch cables (-30 to +60 °C / -22 to +140 °F) (IP65)

Article number:

MX-OPT-Patch1-EXT


MX-NPA-Box

 


PatchBox

Weatherproof PoE Injector and network connector (-30 to +60 °C / -22 to +140 °F; IP65). IEEE 802.3af Network Power Adapter (NPA) for power supply by external power supply units and batteries from 12 to 57 V DC.

Article number:

MX-OPT-NPA1-EXT


MX-GPS-Box

 


PatchBox

Weatherproof GPS time base for MOBOTIX systems (-30 to +60 °C / -22 to +140 °F; IP65) Includes outdoor temperature and illumination sensors. Connects via 2-wire cable (not with Q24, D24, M24).

Article number:

MX-OPT-GPS1-EXT


MX-232-IO-Box

 


PatchBox

Weatherproof signal input/output (-30 to +60 °C / -22 to +140 °F; IP65). Connection of external sensors and switching of external devices via MOBOTIX cameras; RS232 interface, connection to camera using USB or MxBus.

Article number:

MX-OPT-RS1-EXT

You are here Ürünler Mobotix Aksesuarlar